Where to Buy Owens Corning

Thermoplastic polyolefin single-ply roofing membrane installed with heat-welded seams over low-slope roofs. Used on commercial buildings for its reflectivity and resistance to weathering, and applied in mechanically attached, adhered, or ballasted systems.

Sheet material installed over the roof deck beneath the primary roof covering to provide a secondary water-resistant barrier. Used in commercial roofing as felt, synthetic, or self-adhered membrane products beneath shingles, tile, or metal panels.

Preformed blanket insulation made of spun glass fibers, sized to fit between wall studs, floor joists, and ceiling framing. Used for thermal and acoustic insulation in commercial wall and ceiling assemblies, available faced or unfaced.

Mineral wool batt insulation is a semi-rigid fibrous product made from stone or slag, installed in wall and floor/ceiling cavities for thermal and acoustic performance. It is noncombustible and used in commercial construction for fire-rated assemblies, sound control, and continuous insulation applications.

Extruded polystyrene rigid foam board offering consistent thermal resistance and moisture resistance. Used as continuous insulation in below-grade, wall, and roofing applications where durability against water is required.

EPS (expanded polystyrene) rigid board is a closed-cell foam insulation board providing thermal resistance for walls, roofs, foundations, and below-slab applications. It is used in commercial construction as continuous insulation and within roofing and wall assemblies.

Preformed fiberglass, mineral wool, or elastomeric insulation applied to piping, ducts, and equipment. Used in commercial mechanical systems to control heat loss and gain, prevent condensation, and meet energy code requirements.

Acoustic insulation is a fibrous or foam material installed in wall cavities, floor/ceiling assemblies, and around ductwork to reduce airborne and structure-borne sound transmission. It is used in commercial construction to improve STC ratings in partitions between offices, hotel rooms, multifamily units, and mechanical spaces.

Mineral wool or fiberglass batt insulation installed within interior partition wall cavities to reduce sound transmission and provide thermal resistance. Commonly specified in commercial interiors to meet STC acoustic ratings between office, tenant, and demising walls.

Thermal insulation applied to piping to limit heat loss or gain, control condensation, and provide freeze and personnel protection. Available in fiberglass, elastomeric, mineral wool, and cellular glass forms for commercial mechanical and plumbing systems.