Where to Buy Holcim Elevate (formerly Firestone Building Products)

Thermoplastic polyolefin single-ply roofing membrane installed with heat-welded seams over low-slope roofs. Used on commercial buildings for its reflectivity and resistance to weathering, and applied in mechanically attached, adhered, or ballasted systems.

Ethylene propylene diene monomer single-ply rubber roofing membrane installed on low-slope commercial roofs in ballasted, mechanically fastened, or fully adhered systems. Valued for weathering resistance and long service life on flat and low-slope decks.

Modified bitumen membrane is a factory-fabricated asphalt-based roofing sheet reinforced with polyester or fiberglass, applied by torch, cold adhesive, hot asphalt, or self-adhesion. It is used in commercial construction on low-slope roofs, typically in multi-ply systems.

A low-slope roofing system constructed from alternating layers of bitumen and reinforcing ply felts, typically finished with a gravel or mineral surfacing. Used on commercial and industrial buildings to provide a durable, multi-ply waterproof membrane.

Rigid polyisocyanurate foam board with facers, providing high thermal resistance per unit thickness for low-slope roofing. Installed over roof decks in commercial systems as continuous insulation and tapered assemblies for drainage.

Fluid-applied acrylic, silicone, or polyurethane coatings that provide a seamless protective and reflective layer over existing roof surfaces. Applied on commercial roofs for restoration, waterproofing, and reduced heat gain.

Screws, nails, and stress-distribution plates used to secure insulation, membrane, and cover boards to roof decks. Selected by deck type and pull-out resistance for mechanically attached commercial roofing systems.