Where to Buy Carlisle SynTec Systems

Thermoplastic polyolefin single-ply roofing membrane installed with heat-welded seams over low-slope roofs. Used on commercial buildings for its reflectivity and resistance to weathering, and applied in mechanically attached, adhered, or ballasted systems.

Ethylene propylene diene monomer single-ply rubber roofing membrane installed on low-slope commercial roofs in ballasted, mechanically fastened, or fully adhered systems. Valued for weathering resistance and long service life on flat and low-slope decks.

Heat-weldable thermoplastic single-ply roofing membrane made of polyvinyl chloride, offering chemical and fire resistance. Used on commercial low-slope roofs, particularly where grease or chemical exposure is a concern.

Metal roofing panels are formed steel or aluminum panels installed as standing-seam or exposed-fastener systems over roof structures. They are used on commercial, industrial, and institutional buildings for weather-resistant, long-span roofing.

Rigid polyisocyanurate foam board with facers, providing high thermal resistance per unit thickness for low-slope roofing. Installed over roof decks in commercial systems as continuous insulation and tapered assemblies for drainage.

Roof cover board is a rigid substrate installed over insulation to provide a durable surface for membrane attachment and resistance to impact, fire, and wind uplift. It is used in commercial low-slope roofing assemblies beneath single-ply and modified bitumen membranes.

Sheet-metal or membrane components installed at roof transitions, penetrations, and edges to direct water away from joints. Used in commercial roofing to seal parapets, curbs, valleys, and terminations against leakage.

Screws, nails, and stress-distribution plates used to secure insulation, membrane, and cover boards to roof decks. Selected by deck type and pull-out resistance for mechanically attached commercial roofing systems.

Glazed roof openings using glass or polycarbonate units to admit daylight into interior spaces. Used in commercial buildings for natural lighting in atriums, corridors, and open floor areas.

Rigid polyisocyanurate foam board with facers, providing high thermal resistance per inch. Used as continuous insulation in commercial roofing assemblies and wall systems to meet energy performance requirements.